- System speed A4 Up to 36 ppm
- System speed A3 Up to 18 ppm
- Autoduplex speed A4 Up to 36 ppm
- 1st page out time A4 4.3 sec.
- Warm-up time Approx. 20 sec.¹
- Imaging technology Laser
- Toner technology Simitri® HD polymerised toner
- Panel size/resolution 7″ / 800 x 480
- System memory 2,048 MB / 4,096 MB (standard/max)
- System hard drive 250 GB (standard)
- Interface 10/100/1,000-Base-T Ethernet; USB 2.0; Wi-Fi 802.11 b/g/n/ac (optional)
- Network protocols TCP/IP (IPv4 / IPv6); SMB; LPD; IPP; SNMP; HTTP
- Automatic document feeder (optional) Up to 100 originals; A6-A3; 35-128 g/m²; RADF
- Printable paper size A6-A3; customized paper sizes
- Printable paper weight 60-220 g/m²
- Paper input capacity 1,100 sheets / 3,600 sheets (standard/max)
- Paper tray input (standard) 1x 500; A5-A4; 60-220 g/m²
1x 500; A5-A3; 60-220 g/m² - Paper tray input (optional) 1x 500 sheets; A5-A3; 60-220 g/m²
2x 500 sheets; A5-A3; 60-220 g/m²
1x 2,500 sheets; A4; 60-220 g/m - Manual bypass 100 sheets; A6-A3; custom sizes; 60-220 g/m²
- Finishing modes (optional) Offset; Group; Sort; Staple; Punch; Half-fold; Letter-fold; Booklet
- Automatic duplexing A5-A3; 60-209 g/m²
- Output capacity Up to 250 sheets / up to 3,300 sheets (standard/max)
- Stapling output capacity Max. 100 sets
- Stapling Max. 50 sheets or 48 sheets + 2 cover sheets (up to 209 g/m²)
- Letter fold Max. 3 sheets
- Letter fold capacity Max. 30 sets; unlimited (without tray)
- Booklet Max. 20 sheets or 19 sheets + 1 cover sheet (up to 209 g/m²)
- Booklet output capacity Max. 20 booklets; unlimited (without tray)
- Duty cycle (monthly) Rec. 20,000 pages; Max.² 48,000 pages
- Toner lifetime Black up to 23,000 pages
- Imaging unit lifetime Black up to 110,000/600,000 pages (drum/developer)
- Power consumption 110V/220 V; 50/60 Hz; Less than 1.50 kW
- System dimension (W x D x H) 585 x 660 x 735 mm (without options)
- System weight Approx. 56.5 kg (without options)
Re-manufacturing Standard:
- Appearance
No rust, cracks, running paints, scratch, burrs or other obvious defects.
- Toner
At least remain 30% capacity of original toner in each cartridge;
- Cleaning
Whole machine must disassemble, clean all parts and assembly again; - Pick-up Roller Unit
Check each roller carefully, over-worn will be replaced. Each tray must pass 100 pages A4 plain paper test;
- Drum Unit
Check each drum unit consumable carefully, over-worn will be replaced. Pass 30% gray color print test;
- Developer Unit
Pass 30% gray color print test, and will be replaced the corresponding accessories if any obvious defects found.
- Transfer Unit
Check each transfer unit consumable carefully. Pass 30% gray color print test. 8. Fuser Unit Check each fuser unit consumable carefully, over-worn will be replaced. Pass 200g A3 size coated paper test.
What will be Meter Count ?
A: Before we debugging the copiers, we will reset the counter meter; After that, our technician have to debug and test the copier by print our quality, and test at least 100 pages for each tray. So the final counter meter will showing around 400-500 pages around.
